Silvia Club of NSW https://www.silviansw.com/forum/ |
|
TD-06 https://www.silviansw.com/forum/viewtopic.php?f=1&t=1442 |
Page 2 of 2 |
Author: | s13_6 [ Thu Jan 02, 2003 7:34 am ] |
Post subject: | |
badbiki, the GT30 is $2990. |
Author: | badbiki [ Mon Jan 06, 2003 8:22 pm ] |
Post subject: | |
where did you get that quote from? dodgey =) try aronud the $2,100-$2,200 mark.. |
Author: | DRIFTDAVE [ Mon Apr 07, 2003 7:40 pm ] |
Post subject: | ball bearing |
I thought TD series were ball bearing and the old TC series was not. Fell free to prove me wrong ![]() |
Author: | Amosite [ Thu Sep 04, 2003 12:41 am ] |
Post subject: | |
I got one of these bad boys! They are the mitsubishi TRUST unit! Healthy at 450 hp The 20G has a 8cm wheel! Yes, lag till about 4000 RPM at best... |
Author: | s13_6 [ Sun Sep 28, 2003 1:51 pm ] |
Post subject: | |
Prove you wrong? OK, I have a TD06, and it is not BB.. And I get full boost (1.5bar) at 3000rpm.. ![]() But you get that with a 3L V6.. ![]() |
Author: | s13_6 [ Sun Sep 28, 2003 1:53 pm ] |
Post subject: | |
Oh, and Lucas, the quote was from GCG turbo's.. Bit better than stock Garrett unit.. |
Author: | OutZero [ Sat Feb 14, 2004 11:29 am ] |
Post subject: | TD06s-19c |
how would this turbo go on a sr20det? with external wastegate and a tuned lenght manifold how much lagg would i expect? and what power are these turbo's good for? Thanks |
Author: | Shao [ Sun Mar 07, 2004 8:40 pm ] |
Post subject: | |
umm, i am getting manifolds sent in for under $300 Stainless Steel equal runners. very nice, Just the communication between me and that manufacturer isnt great, he is very slack on emails |
Author: | OutZero [ Sun Mar 07, 2004 10:29 pm ] |
Post subject: | |
what business r get that from? Thanks |
Author: | Shao [ Sun Mar 07, 2004 10:31 pm ] |
Post subject: | |
ssautochrome in USA, i posted about a group buy which is happening right now |
Author: | ucb05t [ Sun Mar 07, 2004 11:18 pm ] |
Post subject: | |
Yep thats right, Shao organised it for NS members. My nick is Menace on NS. Thanks Shao... |
Page 2 of 2 | All times are UTC + 10 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |