Silvia Club of NSW

ok got some stuff for sale.

first up is an eoi on a cusco 7 point rollcage, for s13 silvia and 180sx, non sunroof, bolt or weld in, can be used as a half or full cage, this is pretty unique, it has extra mounting points at the b pillar seatbelt mounts, giving more rigidity. its the newer model cro-moly so its pretty light (30% lighter aparantly and stiffer), comes with all bolts, plates and padding.
asking $700 , its a top quality cage, I'll be sad to let this go.







I also have a genuine s13 recaro passenger side mount rail suitable for side mounts, the adjustment lever is broken, can be fixed with a quick weld.
asking $100




stainless steel sr20 s14/s15 front pipe 80mm, monsta brand retail about $150 delivered, I will sell for $80.
its been used for 20min on an s13 but it rubs the chassis rail so I decided not to continue using it.



5x114.3 25-30mm spacers,billet aluminium, I have 4 of these, the thread on em is 1.5 so suit toyota or use the nuts that come with it, they are hubcentric, but the hub ring is too big for nissan wheels, so they might need to be ground off..
asking price $100 for all 4.



Ive also got a Professor "sheepdog" BOV
Quality Japanese brand, adjustable, good for up to 30psi.
just been dismantled, cleaned, and re assembled, excelient condition
$140 shipped or $130 pickup, no idea what it sounds like.





items via pickup in Sydney (northern beaches), as most are quite bulky.

will also trade shit for a trust type-r bov, or greddy warning gauges (temp, press) with cash adjustment either way

_________________

How much to big is the hubcentric ring Billy?
Could it say be lathed down to a useable size or would it just have to come off?
If you don't know could you give me the inside and outside diameters of the hubcentric part so i can work it out?
Are the spacers 2x25 and 2x30?

_________________
1996 180sx
1990 Silvia

i'll take the spacers mate

pm me ya number

cheers

_________________
(.Y.)

Not if i get there first .

_________________
1996 180sx
1990 Silvia

dats cool

all yours

cheers

_________________
(.Y.)

neb pm sent, all spacers are the same size, its somewhere between 25-30mm, ill measure em again later.

basically the studs would have to be bashed or pressed out and the ring hacksawed or ground off, or you could prob just lathe the whole thing.

_________________

theres no chance of it fitting in a s14?

_________________
DORIFT!!!!!!!!!

i'm interested in the cage. just a few questions. being a japenese brand is this cage cams approved? and does it need to be cams approved to participate in ida drift days? seeing as they're more strict now?

smokin: no it wont fit s14

sideways:
1) no not cams approved as its jap.
2) no. ida does not need cams approval.
Ive ran it as a half and full cage at almost every ida day over the last year, cams approval is currently only needed for drift australia and superdrift events

and yeah it looks like someones gonna pick it up for 700 next week, so youve gotta beat that.

_________________

alright i'll se what i can do thanks for the info.

how tight are the springs in the prof bov's? do they open up really early? And how loud would they be compared to a turbosmart supersonic?

its adjustable, no idea on how loud it is, never put it on the car.

_________________

Damn that cage looks the goods... i am only after a half one, but would purchase that in a second if I had the $$$$... goodluck with the sale mate.

_________________
Co-Founder, President & Webmaster
mayhem@silviansw.com - www.silviansw.com
Why drive when you can drift?

birri how bored where you, to actually set up the cage in your garage?

_________________
tipper



www.aus12.org

bored enough to sit in it with a steering wheel and make drift noises.

_________________