Silvia Club of NSW https://www.silviansw.com/forum/ |
|
Stereos - Audio Loom Colour Code https://www.silviansw.com/forum/viewtopic.php?f=11&t=18114 |
Page 1 of 1 |
Author: | bigkev81 [ Mon Sep 05, 2005 11:40 pm ] |
Post subject: | Stereos - Audio Loom Colour Code |
Hey guys, just installed my new stereo system tonight. Found this info on the net and posted it up for all those that dont have a multimeter. Mine broke tonight so I used this info and i can verify its all correct except for the illumination, i didnt hook that one up. Red Black 12v Constant Red Blue Illumination Blue ACC 12v Black & Red Line 12v Output for Electric Antenna Pink (-) & Purple (+) Right Rear Speaker Green (-) & Red (+) Left Rear Speaker Blue White (+) & Blue Green (-) Left Front Speaker Brown White (+) & Brown (-) Right Front Speaker |
Author: | Magnet [ Wed Sep 07, 2005 6:40 pm ] |
Post subject: | |
Every headunit doesn't follow that colour code, belive it or not |
Author: | ZEi250t [ Wed Sep 07, 2005 7:45 pm ] |
Post subject: | |
nissan, toyota, pioneer, sony, panasonic, jvc, fujitsu ten all use those colour codes |
Author: | Magnet [ Wed Sep 07, 2005 8:56 pm ] |
Post subject: | |
...shutup |
Author: | bigkev81 [ Wed Sep 07, 2005 11:18 pm ] |
Post subject: | |
hahahah OWNED!!!! |
Author: | ZEi250t [ Thu Sep 08, 2005 12:37 am ] |
Post subject: | |
sorry, ownage wasnt intended. just posting what i have found when installing shit in people's cars |
Author: | Magnet [ Thu Sep 08, 2005 5:31 pm ] |
Post subject: | |
I was implying in my first post that this is a fairly pointless thread. Not all headunits use these codes, but thats not the point. The colour codes are fairly basic. Red-power, black-ground, speakers, big antenna cable, etc. And if you cant work them out on your own, you probably shouldnt be installing it. |
Author: | ZEi250t [ Thu Sep 08, 2005 5:38 pm ] |
Post subject: | |
hopefully a manual is supplied with it. that helps too. ohh bought a sony head unit for GFs little sister on the weekend. it was missing the loom. nice one sony! hahah |
Author: | hobzta [ Thu Sep 08, 2005 9:57 pm ] |
Post subject: | |
Pig Magnet wrote: Not all headunits use these codes, but thats not the point.
I thought the post was about the colour codes of the loom in the car that your wiring into...not the colour codes of the new headunit wiring loom |
Author: | bigkev81 [ Fri Sep 09, 2005 1:48 am ] |
Post subject: | |
hobzta wrote: Pig Magnet wrote: Not all headunits use these codes, but thats not the point. I thought the post was about the colour codes of the loom in the car that your wiring into...not the colour codes of the new headunit wiring loom Yep, thats what it is. |
Author: | driftspec [ Sun Oct 23, 2005 8:09 pm ] |
Post subject: | |
This doesn't seem to be the same for an S15 This is a picture of my S15 - Spec R loom that plugs into the factory 6 disk stacker. As far as I can see, the wires into the connecter are (if u look at the loom front on from left to right) grey/grey black white/white black purple yellow orange red blue/blue black green/green black ================== i'm assuming the ones with a slash are speaker connections (front L = white/white black) (front R = grey/grey black) (rear L = green/green black) (rear R = blue/blue black) so that leaves me with purple, yellow, orange and red i need to know the Constant Power Ignition Power can anyone help out?? |
Author: | ZEi250t [ Sun Oct 23, 2005 10:04 pm ] |
Post subject: | |
notice thats the single plug (from the HU) going into the two plugs that attaches the rest of the loom? after those two plugs are the standard colouring |
Page 1 of 1 | All times are UTC + 10 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |