there is a hole there. no spash guard there
so you can see right through to the road
| Silvia Club of NSW https://www.silviansw.com/forum/ |
|
| Stereos - Installing Splits in an S15 https://www.silviansw.com/forum/viewtopic.php?f=11&t=13017 |
Page 2 of 2 |
| Author: | ZEi250t [ Sat Dec 18, 2004 10:07 am ] |
| Post subject: | |
there is a hole there. no spash guard there so you can see right through to the road
|
|
| Author: | A'PEXi [ Sat Dec 18, 2004 12:45 pm ] |
| Post subject: | |
lol doesn't matter, got it thru the firewall, considering i already had a boost gauge wire goin thru there, was much easier than i thought, the hard part was getting the speaker wire through from the door into the car..... took at least an hour each door  ......
anyway, its done, tweeters are located in jdm position as posted by S15R.... and amp is located on the shelf in the boot 
|
|
| Author: | driftspec [ Thu Oct 27, 2005 10:53 pm ] |
| Post subject: | |
sorry i know its an old thread and all, but i was just wondering how would one go about getting the wire from the tweeter through the door into the cabin?? it seems i have to remove the front metal panel of the door and then fiddle it through and remove the kickpanel and try to find it coming through.. anyone know of an easy way?? cheers, Alan |
|
| Author: | ZEi250t [ Thu Oct 27, 2005 11:56 pm ] |
| Post subject: | |
use the factory boot that all the other wires use, it will come out behind the kick panels. if you open the door, that will show you exactly where it goes into the cabin. OR, mount the crossover in the door so you dont have to run extra wiring and can keep the stock wiring |
|
| Page 2 of 2 | All times are UTC + 10 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|